Best Shallow Mount Subwoofers For The Money in 2021

I think you can agree that there is nothing as frustrating as sitting behind the wheel and having to put up with low-quality audio from your car’s audio. What’s an even bigger concern is that whereas everyone would like to get the best upgrade to their vehicle’s audio system, this isn’t something that’s that easy to achieve.That is why the discussion for Best Shallow Mount Subwoofer comes in front.

Speaking of upgrades, shallow mount subwoofers are the preferred choice of most due to their compact yet high-performing nature.Whereas regular subwoofers are difficult to mount, shallow mount subwoofers are quite the opposite as they provide a more versatile configuration this perfect for use in smaller spaces.

The Top shallow mount subwoofers are available in different sizes all of which are from different brands. This being the case, we’ve put together a list of the best 10 shallow mount subwoofers each of which will be a worthy upgrade for you.Let’s got ahead and see what you’ve got to look forward to, shall we?

Comparison chart

It would be much easier if you were able to compare the best alongside each other, right? That being said, find out below which could be the best car subwoofers for you.

Picture	Top shallow mount sub	Mounting Depth	Power rating (in watts)	Rating	Price $$
	PIONEER TS-SW2502S4 10-Inch, 1.200 Watts Shallow-Mount Subwoofer	3-1/8″	RMS: 300PEAK: 1200		Check The Price!
	Skar Audio VD-10 D2 10″	4.41”	RMS: 500PEAK: 800		Check The Price!
	Rockford Fosgate P3SD2-8 8″ Dual 2-Ohm Punch Series	2-11/16”	RMS:150PEAK:300		Check The Price!

Top 5 Expert tips on choosing the best shallow mount sub

Here are some things you might want to pay attention to in order to optimize the functionality of your shallow mount sub.

• Always take the measurements of the installation location
• Always consider the power handling of your head unit/amp
• Mount the subwoofer either in the rear deck or the doors for a good sound stage
• It’s best that the subwoofer size be directly proportional to your vehicle’s size
• Reinforce the mount to prevent them from loosening up due to vibrations

10 Best  shallow mount subwoofer reviews in 2020

On to today’s main agenda, it’s time to find out what the fuss about shallow mount subwoofers is all about. Step up the bass sound system in your car to a whole new level with either of the subwoofers listed below.

#1. Skar Audio VD-10 D2

If you are all about getting the biggest bang for your money, this is one shallow mount sub that sure will give you this. It is available in 5 different variants each of which has got a different size and voice coil configuration. Let’s see what the VD-10 has in store for us, shall we?

Has Got a 500-Watt RMS Rating

Equally an important feature for car speakers and subwoofers, this one boasts quite a high RMS. With as much as 500 watts, you’ll be getting quite a deep and clear bass from this bad boy.What’s even more interesting is an even much higher peak power rating. So as to hit the higher notes in your music, the speaker can momentarily surpass the RMS. And give you a musical experience unlike any other.Tempting as it may be to use the peak power rating at all times for a high bass, I strongly advise against this since this could risk blowing the voice coils.Speaking of voice coils, let’s find out how this one holds up and why you should get it.

Features a Dual Voice Coil Configuration

One of the distinguishing factors between a good and a bad shallow mount subwoofer is the voice coils. On this one, you get a dual 2-ohm coil.This basically means that it’s possible for you to wire it up differently and optimize on the power usage from your amp or head unit for the kind of bass you desire.With an impedance rating that is as low as 2 ohms, it’s able to channel an ample amount of power from your stereo. Which qualifies this as a good shallow mount sub for low powered stereos.It’s also worth mentioning that it features high-temperature copper voice coils which can be able to handle high power ratings without being damaged.

Uses The Competition Grade Cone and Foam Surround

Even though it’s not the lightest and the most sensitive, the cone will hold up quite well in giving out a quality bass. Around the cone is a foam surround which basically allows for flexible movement of the cone. And upon doing so ensure the bass is dissipated perfectly.It’s also worth pointing out that foam surrounds aren’t affected by extreme temperatures. Such as, you can count on this subwoofer to get you the best bass for quite a long time.

Comes With a High-Frequency Range Response

With the lowest achievable frequency range being 45Hz and the highest being 500Hz, you’ll be able to get a really good bass quality out of this subwoofer. For the resonance frequency, it’s rated at 35.2Hz which is quite ideal for a deep and quality bassIt is also worth mentioning that the subwoofer has got a low-profile single stack ferrite magnet. That despite having a shallow 4.41” of mounting depth. At the end of the day, you get an amazing bass quality without the need of worrying about too much installation space.

84.7 Db Sensitivity Rating

Though this is not the highest, it’s enough to get the bass going loud enough. While at the same time utilizing a reasonable amount of power

PROS

• Has got a 4.41” mounting depth
• Features a dual 2-ohm voice coil configuration for versatility
• Has got an RMS rating of 500 watts for a quality bass

CONS

• The bass may cut off when played at a high volume

#2. PIONEER TS-SW2502S4 10-Inch, 1.200 Watts Subwoofer

On to the next one and yet another reputed brand for having some of the best subwoofers is the PIONEER TS-SW2502S4. If you are looking for a slim subwoofer that is still up to the task, I’d recommend that you do check out this one.

Features a Mica-Injected Resin Cone

In order for this subwoofer to compete fairly against the regular sized subwoofers, the cone design is quite unique.First off, the fact that it is made of Mica-injected resin renders. It rigid and lightweight in nature which in turn makes this one of the most sensitive cones you can get.The end result of having a highly sensitive cone is that you get to have optimal and accurate bass production. It is also worth mentioning that the mica cone is rigid hence durable in nature.The cone structure is also oversized. This results in a larger cone and gasket surface while at the same time retaining the external structure of the subwoofer. With this cone surface, the subwoofer is able to produce a louder and deeper bass by moving more air 

20Hz-125Hz Frequency Response

It’s a general rule of thumb to pay attention to the lower end of the scale when it comes to the frequency response of subwoofers.On the SW2502S4, you’ll get to enjoy a really deep and high-quality bass since it can go as low as 20Hz and reach a maximum of 125Hz.The fact that this is one of the best 10-inch shallow mount subwoofers  gives you the advantage of playing lots of music genres- quite the perfect choice for both fast-paced and slow-paced music.

Features 100-300 watts RMS

Possibly one of the major determining factors of shallow mount subwoofers, the RMS is rated at a max of 300W. this basically gives you the convenience of getting a really loud bass.Though we always recommend that you stick to the RMS, the peak power is an amazing 1,200 watts. This allows you to work with high powered head units or amplifiers and hit the really high bass notes.

Has Got a 3-1/8 Mounting Depth

One of the features that make this shallow mount sub stand out from the rest is its mounting depth. Which is even much smaller than what ought to get from other shallow mount subwoofers.With 3-1/8 inches, you’ll find it easy to set this up in your car. You could also use an enclosure in which case the recommended dimensions are 0.35-0.70 cu. ft

Has Got a 4-Ohm Impedance

Though this is not the smallest impedance rating you could get on a shallow mount sub, it’ll be able to work well with most head units and amplifiers.Also,Other than just optimizing on the amount of power from your head unit, it’s also worth mentioning that it has got a sensitivity rating of 91 dB that’s actually above average. You will, therefore, be able to attain a high volume without using too much power

PROS

• It’s got a 300-watt power rating & 1200-watt peak power
• Features a 3-1/8” mounting depth
• Comes with a single 4-ohm impedance voice coil

CONS

• It doesn’t fit in a standard 10-inch box

Read Fun RIding By Electric SCooter

#3. New Rockford Fosgate R2 Ultra Shallow 10-Inch 2 Ohm DVC Subwoofer

The cooling system is amazing, the material construction commendable and the performance above average. Want something that’ll give you a kick for your buck? I’d recommend that you do give the Rockford Fosgate R2 Ultra shallow mount sub a try.

Features a Mica Injected Polypropylene Cone

Since lightweight and rigid is the best way to go when it comes to the cone material when it comes to both speakers and subwoofers.With the mica-injected poly cone, this is exactly what you’ll be getting and as such, a highly sensitive configuration. At the end of the day, it’s going to push enough air to get the bass going exactly the way you like it. It is also worth mentioning that due to the durable nature of polypropylene, the longevity of this woofer is guaranteed even when used in extreme conditions.

Includes a Spider Venting

By having a Stamp-cast basket design which is then integrated with a spider venting, high power supply to it won’t be a problem. The spider venting ensures that there is no heat build up which in turn ensures the voice coil remains intact for as long as possible.

Has a Shallow 3.4” Mounting Depth

As the name suggests, this is indeed an Ultra shallow mount subwoofer. Demanding only 3.4 inches of mounting depth, you can have this set up easily in your car doors or at your rear deck. If you choose to use an enclosure, you won’t have to go too large on this as well which means you get to have an amazing bass output while at the same time saving on storage space.

Has Got a 400-Watt Power Rating

On to the power handling, this bad boy boasts an amazing 400 watts for the RMS. With this being the threshold for the continuous power rating, the bass output will be really great.

Has Got a 2-Ohm Impedance

Besides the power rating, yet another feature you’ll appreciate on this bad boy is the 2-ohm impedance. With as low as this, this shallow mount subwoofer will channel enough power from your head unit or amplifier for decent bass output.To add icing to the cake, it’s also got a dual voice coil which makes it eligible for use in lots of vehicles. In addition to this, depending on the amount of power you’d want to get out of it, you could go ahead and wire it differently, channel more power from your stereo and end up with a louder and punchier bass.

That’s not everything,The subwoofer also includes an anodized aluminum voice coil former which has got high-power handling. This being the case and considering it has got a spider venting, you won’t have to worry about the voice coil blowing from too much heat.For the impedance, it’s rated at 83 dB which is quite average and will be able to reach high volumes quite well. Not to forget the stitched tinsel leads, these basically improve the subwoofer’s reliability via reducing fatigue and any chances of shorting 

PROS

• It features an aluminum voice coil and spider venting for heat dissipation
• Comes with a mica injected polypropylene cone
• Has got a dual 2-ohm voice coil configuration for versatility

CONS

• You might want to have an enclosure for a richer bass

#4. Jl Audio 10tw3-d4 Shallow-mount 10

Yet another 10-inch sub is the Jl Audio 10tw3-d4. Other than the fact that it saves a lot on the mounting space, you also couldn’t go wrong on this bad boy when it comes to the performance and the build quality. That being said, let’s see what it packs under the hood.

It Features An Injection Molded Cone & Rubber Surround

Starting off with the material construction, the Jl Audio 10tw3-d4 features a high roll rubber surround. As far as flexibility is concerned, rubber just so happens to be the best of the best.Well, other than allowing for optimal movement of the cone, it’s also quite durable since it will stand up quite well in high temperatures and dust for round the clock dependability.

Other than the rubber surround, this shallow subwoofer features an injection molded polypropylene cone. Due to being lightweight and rigid, you’ll be enjoying quite a realistic bass output since it will be pushing just the right amount of air.Similar to the rubber surround, the mica-filled poly cone is just as durable as it has an aesthetic aluminum-alloy dust cap that adds on to the protection.

Saves On The Mounting Space With The 3-1/4” Mounting Depth

Being a shallow mount subwoofer, it is expected that you are able to set it in place as easily as possible and 3-1/4″ should be enough to make this possible. There is also no pole venting as well to ensure you can go as flexible as possible as far as installation is concernedThere are also no pole vents which makes it possible to set this up close to rear walls of your enclosure which also doesn’t have to be large in size. At the same time, despite being less demanding of the installation space, this 10-inch subwoofer will not be handicapped on the bass.

Has Got A Dual Voice Coil

Despite the voice coil not being the lowest, you’ll come across on a shallow mount sub, the fact that it is a dual 4-ohm coil compensates for this.If you’d like to tune up the bass of your system a notch or have it match the wiring you have in your vehicle, it basically has got the flexibility to allow for this.Yet another advantage you will get from this voice coil design is that it can also be used in amplifiers or head units that have got different power ratings and at the same time produce an amazing sound quality.

100-400 Watts For The RMS Rating

Moving on to the key determining factor of nay ideal subwoofer, the power rating on this bad boy is also quite amazing. With the RMS being 400 watts coupled up with the dual 4-ohm impedance, there’s no way you could go wrong with the 10tw3-d4.The fact that this is also a 10-inch sub means that you can enjoy lots of music genres and get an amazing experience all the same.It’s also worth mentioning that it features an impedance rating of 82.10 dB that will optimize on the power from your stereo for a loud enough bass output.

PROS

• Comes with a dual 4-ohm impedance & 82.10 dB rating
• Save on installation space with the 3.25 shallow mounting depth
• Features a polypropylene cone and a high-roll rubber surround

CONS

• You need to be really careful when cutting the enclosure size

#5. JBL CLUB WS1200 12″ Woofer

Standing out to be one of the most popular brands in the production of some of the most amazing audio products, JBL has got the CLUB WS1200. As this is a 12” sub, the sound quality is above average and the build quality decent as well. Do take a look at why this is possibly the best 12 inch shallow mount subwoofer.

It Includes 27-175 Hz Frequency Response

The quality of the bass you get from any subwoofer is dictated by the frequency response that it’s rated at. So, to ensure that you get the biggest bang for your buck on this one, you’ll be enjoying quite a deep bass at 27Hz.With the highest achievable frequency being 175 Hz, you’ll also be able to play lots of different music genres.Being a 12 shallow mount sub, it’s going to be a perfect match for most vehicles. Speaking of the fit, how about we take a look at how good the installation depth is?

Saves On Mounting Space With The 83mm Mounting Depth

Regardless of its capabilities as a shallow mount subwoofer, it’s quite impressive as far as saving on space is concerned. As a matter of fact, you might need to make minor adjustments either in your rear deck or at the side of your car door.To get a richer sound with an enclosure, you won’t have to go too large on this. Either way, whichever installation style you settle for.

Features a 92dB Sensitivity Rating

Something that you’ll really appreciate if you have a low powered head unit, the 92dB sensitivity will be quite a huge leap forward in your vehicle’s audio system.Without the need of using too much power, the CLUB WS1200 should be able to attain high volume sounds while at the same time observe utmost clarity

Comes With 250W Continuous Power Handling

On to yet another feature that defines how good a subwoofer is, the RMS power on this bad boy is rated at 250 watts and you get 4 times as much as this for the peak power.Though the RMS rating is not really the highest, it should be enough to give out a decent bass while working hand in hand with the sensitivity rating and frequency response. The peak, on the other hand, should make it possible for the sub to hit the higher music notes.

Has Got a Low 4-ohm Impedance

To ensure that it’s able to optimize on the amount of power from the head unit, it’s got a 4-ohm voice coil. One striking feature about the impedance of this subwoofer is that from it, you can get either 1, 4, 2 or 8 ohms.At the flip of a switch, you’ll e able to listen to 2 ohms and 4 ohms which are the two most used impedance levels from a single woofer.So, without compromising on the stability and the temperature margins of your 12 shallow mount sub, you’ll get quite an amazing level of flexibility.With this working hand in hand with the sensitivity and the power rating of the speaker, it’s undoubtedly going to give you a kick for your buck.

PROS

• Comes with a high 92dB sensitivity rating
• Features a 4-ohm impedance
• 250W RMS and 1000W peak power rating

CONS

• You should observe the amount of power to keep it from blowing

#6. Pioneer TS-SW2002D2 8-inch 

If you are really short on installation space, then this subwoofer is definitely meant for you. Other than being from one of the top brands out there, it packs the amount of peak power which when coupled up with an amazing build quality gives the perfect subwoofer for anyone who’s after saving on the installation space.

Has Got a Mica-Injected Resin Cone

As far as the best 8-inch shallow mount subwoofers are concerned, it’s all about paying attention to details considering these are the smallest you could find.So, with lightweight and rigid being the way to go when it comes to the cone, the one on this one should be perfect to push enough air and attain the right level of sensitivity for both a louder and deeper bass.Also, without altering the external dimensions of this subwoofer, the cone structure is oversized hence you get both a larger cone and gasket surface.

Features a Shallow Mounting Depth

The key reason for getting this subwoofer is to have it fit in the smallest of spaces and the best way via which this one is able to achieve this is with the 2-5/8” mounting depth.As compared to other shallow mount subwoofers, this is almost half the mounting depth you will get. This being the case, you’ll hardly have to worry about where to put an enclosure when you’re really short on space.Since it is engineered to work perfectly well in free-air applications. You could, however, use a slim enclosure to pump up the deep bass a little more.

It Handles Up to 150W RMS

Moving on to the power rating, it should go as high as 150W. Even though this is not really the highest wattage you could get from a subwoofer, it’s quite impressive considering the size of this one.

For the peak power, it is rated at 600 watts which is also quite impressive to hit the high bass notes and have you enjoy every bit of your favorite tracks.

Has Got a Dual 2-ohm Voice Coil

Going and in hand with the power rating on this bad boy is also an amazing voice coil configuration. Being a 2-ohm coil, you’ll have this utilize every bit of power from your stereo or amp.In addition to this, it’s also got a dual configuration which makes it perfect if your vehicle is wired up differently or need to get more power out of it for richer bass. It would also be a good idea to be watchful of how much power you use on it since it can only take too much.

Has Got a Dual 2-ohm Voice Coil

Going and in hand with the power rating on this bad boy is also an amazing voice coil configuration. Being a 2-ohm coil, you’ll have this utilize every bit of power from your stereo or amp.In addition to this, it’s also got a dual configuration which makes it perfect if your vehicle is wired up differently or need to get more power out of it for richer bass. It would also be a good idea to be watchful of how much power you use on it since it can only take too much.

Boasts An Impressive Frequency Response

With the frequency response being the defining factor of the kind of bass output you get from your subwoofer, the 20-200Hz you’ll be getting out of this bad boy is quite amazing. If you need a deep and rich bass, the lower end of the scale will take care of this quite well.On the other hand, if you want to enjoy the vocals in your audio a little bit, the higher threshold will make this possible as well.

Has Got an 86dB Sensitivity Rating

Higher is always better as far as sensitivity is concerned and even though this is not the highest you’ll get on a shallow mount sub, it’s enough to get the sound going just right. With this, the Pioneer TS-SW2002D2 will be able to get the bass volumes without using too much power from your car stereo.All things considered from the technical details to the material construction of this bad boy plus the fact that you won’t have to break the bank to have it in your car, there’s no way you could really go wrong.

PROS

• It includes an oversized cone structure for a richer and realistic bass
• Comes with a dual voice coil for high flexibility and optimal power utilization
• Enjoy a rich bass with the impressive 20-200Hz frequency response

CONS

• It’s not ideal for use in a large car

Also Read : Best Ultrasonic Carb Cleanrer

#7. Rockford Fosgate P3SD2-8 8″ Dual 2-Ohm Punch Series

We’re really close to being done with our reviews and I’ve got to say, it’s been a good one so far. So, here’s yet another 8-inch sub that also does have an impressive brand name to it but that’s not really enough, is it? How about we take a peek at what the P3SD2-8 is all about?

It Comes With A Dual 2-Ohm Voice Coil

Being one of the most defining features of the best shallow mount subwoofer for the money, this subwoofer is rated at a 2-ohm impedance. To add icing to the cake, it also features a dual voice coil configuration. Now, here’s why this is indeed worth taking a look atWith the 2-ohm impedance alone, the P3SD2-8 should be able to optimize enough power even if you are using a low-powered head unit. With it being a dual voice coil however, it should be compatible with the wiring of different vehicles.

It can also be set up in such a way that you end up with a lower impedance rating. This way, you get to channel even more power from your head unit for more bass.Speaking of the power handling, take a look next at how well this 8-inch shallow mount sub holds up.

Features a Shallow Mounting Depth

The key reason for getting this subwoofer is to have it fit in the smallest of spaces and the best way via which this one is able to achieve this is with the 2-5/8” mounting depth.

As compared to other shallow mount subwoofers, this is almost half the mounting depth you will get. This being the case, you’ll hardly have to worry about where to put an enclosure when you’re really short on space since it is engineered to work perfectly well in free-air applications.You could, however, use a slim enclosure to pump up the bass a little more.

Offers a 150-Watt RMS Rating

With the RMS rated at 150 watts, it’s quite average considering this is an 8-inc subwoofer; the peak power, on the other hand, is rated at 300 watts which makes this subwoofer perfect for hitting the extreme bass level.

Since the power handling is just as good as the RMS rating, it would be wise to observe the threshold on this one. After all, with the low impedance rating, the subwoofer should virtually be able to give you a decent bass even from a low powered head unit.

Has Got a Frequency Response Of 38-250Hz

Being a small-sized subwoofer, this frequency response is quite impressive. With the minimum being 38Hz, it should be able to give out a rich bass and with the higher threshold of the frequency response being 250Hz, you’ll pretty much enjoy all music genres.It’s also worth pointing out that being the smallest shallow mount sub you could get your hands on, it’s perfect for playing all music genres and outstanding on both the fast-paced and the slow-paced tracks.

Features One Of The Smallest Mounting Depths

It’s not really the best shallow subwoofer if it does not save on installation space, is it? Well, with this one, you can have it set up pretty much anywhere in your car since the top mount depth is 2-11/16 inches, a size that is less demanding of space even when you choose to use an enclosure.

Has Got a Spider Venting

When it comes to bass production, it’s all about optimizing on the power and when this is not checked, the subwoofer could easily blow. So, to ensure this does not occur in the P3SD2-8, there is a spider venting integrated int to the StampCast basket. This allows for optimal heat dissipation.To add on to the heat dissipation, the anodized aluminum formers used in its construction allow for heat dissipation which then makes it possible to maximize on the power supply.

The Build Quality And Design

Other than the technical specifications, you also need to pay attention to the materials used in the cone and surround design. The cone is anodized aluminum which, due to its lightweight and rigid nature will be responsive enough for a rich bass. The cone also does have a dust cap which means there’ll be no sound quality distortions at all.

For the surround, it has got the M-roll Santoprene surround which uses the Vertical Attach Surround Technique to increase the radiating cone area of the subwoofer.

PROS

• It features an aluminum voice coil and spider venting for heat dissipation
• Enjoy an accurate bass output with the aluminum cone and M-roll Santoprene surround
• Features only 2-11/16 top mounting depth

CONS

• The sound pressure is not that high

#8. Alpine SWR-t10 10-Inch 1800 Watt 4 Ohm 

Not so fast, we’re yet to be done with the best shallow mount 10-inch subwoofer. From Alpine is the SWR-t10. Well, not only does this subwoofer look good but it is also quite impressive as far as the build and sound quality are concerned. So, could this be your next worthy upgrade? Let’s find out, shall we?

Features a Thin Design For Versatile Installation

A must-have feature for any shallow mount subwoofer, the alpine Swr-t10 is designed in to be the perfect upgrade to your audio system and save you from the installation hassle of regular subwoofers.

It features a thin design which should fit perfectly in your vehicle and thin enclosures. For small vehicles, you sure are going to be getting an audio experience unlike any other on all music genres.Even better, this is one of the few car subwoofers that does have FEA-optimization. This allows for the best linearity, reduces sound distortions and improves power handling.

High Power Handling

Now here’s something you won’t come across every day on a 10-inch shallow mount sub. With 600watts for the RMS, it definitely blows every other sub in its class out of the water.This basically gets the bass-rich and realistic and more so, it can be used effectively with high powered amps and stereos. For the peak power, it packs an amazing 1800 watts which gives you an impressive musical experience.

Has Got a Rubber Surround And An Aluminum Cone

On to the material construction, this bad boy has got an aluminum cone which due to its lightweight and rigid nature should be sensitive enough to output a high-quality bass.Around the cone is an injection molded Santoprene rubber surround. Besides allowing for maximum flexibility of the aluminum cone, it stands out to be the most durable as far as surrounds are concerned and you won’t have to worry about this being damaged in extreme conditions.

Comes With A Heat Sink

For the voice coil, it features a 4” diameter single layer edge -wound ribbon wire voice coil. The same also has got a unique spider and pass-through gap design and on top of this, it’s got an output vented heat sink which keeps airflow management at its best hence keeping the woofer cool at all times.As for the impedance rating, it’s got an amazing 4-ohms. The only downside is that this is a single voice coil so you might want to consider getting a high-powered amp or head unit to have this bad boy reach its full potential.

Has Got A Neodymium Magnet Structure

It takes very little to get the bass as good as it is on this bad boy. This being the case, the magnet in use is the Neodymium 35SH magnet structure. Considering this is a 600w shallow mount subwoofer, you’ll definitely be getting a sound system that’s above average.

PROS

• Comes with a vented voice coil heat sink for airflow management
• Has got an injection Molded Santoprene rubber surround
• Features a 600-watt RMS and 1800-watt peak power rating

CONS

• For the rickets bass, you should have this car subwoofer in an enclosure

#9. Skar Audio VD-10 D2 10″ 500W RMS Dual 2

Coming up second last on our reviews is unlike any other subwoofer deal you’ll get out there. With this pair from Skar audio, you’ll be enjoying every second of your favorite tracks and to back this up, the build quality is just as amazing as the audio performance. Here’s what you ought to look forward to:

Save On Installation Space With The Shallow Mount Design

Despite subwoofers being quite amazing when it comes to stepping up the bass, the same cannot be said as far as saving on space is concerned. In the case of this pair, however, this is taken care of since you’ll only be needing 4.41″ of mounting space.Being less demanding of space while at the same time promising an above average bass quality, you’ll have it set up easily in your rear deck, car door or a thin enclosure. In either case, you sure are going to have an amazing experience since it features a powerful and low profile single stack ferrite magnet

Features 500W of Continuous Power Handling

The amount of bass you get from your subwoofer is highly dependent on the amount of power it’s got right? This being the case, higher is always better and with the 500W of RMS you’ll be getting from these subwoofers, the bass will undoubtedly be rich and realistic.To further enhance the music experience, the peak power is rated at 800W though it would be a bad idea to use this continuously since it would compromise the integrity of the voice coil. speaking of which, let’s have a look at what you should be looking forward to on the impedance rating of this bad boy

Comes With The Dual 2-Ohm Voice Coil

In order to get enough power to the subwoofer, there is a 2-ohm voice coil included within either of these which on their own should get enough power from your amplifier or head unit.To add icing to the cake, however, you’ll be working with a dual voice coil configuration. This means the subwoofer can be wired up differently to end up with more power. It’s also worth mentioning that you’ll be working with a high-temperature 2-inch voice coil that won’t give in even in the event of high-power input.

Features 85.9dB For The Sensitivity

Other than the low sensitivity rating, yet another feature you’ll appreciate is the sensitivity which is rated at 85.9dB. It’s enough to give you high volumes while at the same time utilizing less power plus since you’ll be getting a pair on a single purchase, there’s no way you could go wrong.

Has Got Pressed Paper For The Cone Structure

Though paper is not the best of the best when it comes to subwoofer cones, this one should be rigid and lightweight enough to attain the perfect level of sensitivity for accurate and quality bass.

PROS

• It uses a low-profile ferrite magnet and has a 4.41 mounting depth
• Utilizes a high-temperature 2-inch voice coil
• Provide 500 watts RMS and 85.9dB sensitivity for a realistic powerful bass quality

CONS

• You should break them in gently first before subjecting them to high power

#10. Kicker CVT124 12″ Single 4-ohm Shallow-Mount CompVT Series

Though this is no the cheapest shallow mount sub, it might just be the perfect truck subwoofer not only because of its size but also due to the amazing sound output that’s to be expected from it. Do take a look at every reason this should be a huge leap forward to your car audio system.

It’s Built With a Four-Layer Voice Coil

Though a 4-ohm voice coil is not really the lowest impedance rating you’ll get out there but is recommended as far as quality bass is concerned. The reason for this is quite simple- it’s going to optimize the power supply from your head unit or amplifier.For the power handling, they’re rated at 400 watts for the RMS and 800 wats for the peak. These should be enough to give you a decent bass provided you get then powered with a good enough amplifier or stereo.To keep the motor cool and ensure the subwoofer persists even in high power input, there is a perimeter venting that ensures continuous air flow.

As Got a Ventless Solid Pole Design

It’s all about saving on space when it comes to the shallow mount subwoofers. This being the case, the Kicker CVT124 features a 4-3/8 mounting depth and the solid pole is ventless which makes it possible to have this set up directly to the rear wall of your enclosure.

Includes An Injection-Molded Polypropylene Cone

As for the material construction, the cone is made of polypropylene which is commended for its rigid and lightweight nature hence high sensitivity. This results in the clearest bass response.Holding the cone is a wide Santoprene surround that also ensures flexible movement of the cone thus pushing enough air for quality bass. It’s also worth pointing out that the surround is double stitched which further enhances its movement.

Has Got An 87.1dB Sensitivity

To give you the best bass quality even in high volumes, it’s built with 87.1dB for the sensitivity which does this best. As such, you can go ahead and use it perfectly even with the average head units and amplifiers.All things considered, from the material construction to the power handling and cooled motor structure, there’s no better way to get a kick for your buck

PROS

• It features a Santoprene surround and poly cone
• Ventless solid-pole design for versatile mounting in different enclosures
• Has got a 400-watt RMS and 800-watt peak power rating

CONS

• You’ll need an enclosure to have them at optimal performance

Also Read: All About Car Security

What To Consider Beforte Buying Shallow Mount Sub 

Other than the size factor, you might also want to pay attention to the following in order for you to get the best shallow mount subwoofer.

The Power

Here, you’ll get the peak and the RMS power rating. You’ll want to pay attention to the RMS since it’s the amount of power that the sub will take in without risking blowing up the voice coils.As such, it would be a good idea to step up to a high-powered amplifier if necessary, to ensure you optimize the sound from the subwoofer.

Frequency Response

A decent shallow mount sub will have a frequency response ranging from 30Hz to 200Hz. And the best will have as low as 20Hz.By paying heed to the lower end of the scale, the bass intensity is determined. Since the general rule of thumb is that the lower the frequency is, the better the bass output.

Amount Of Voice Coils

You can either get a dual or a single voice coil. Regarding this, I’d recommend that you go for the dual voice coil.Since this can be wired up differently to channel more power from your head unit. This amount of flexibility also saves you the trouble and expense of getting a new subwoofer.It would also be a good idea to stick to as low an ohm rating as possible when choosing a subwoofer since this means it gets to channel more power from your stereo.You should, however, pay attention to the power rating of your car subwoofers- you don’t want to give it more than it can handle since this would blow the voice coil.

The sensitivity

With this, I’d recommend that you stick to subwoofers of high sensitivity if you have a low powered head unit or amp. Higher sensitivity rating means that the subwoofer will use less power to achieve a high volume so it would be a good idea to stick to sensitivity ratings of 92dB and above.

Final Verdict

It’s been a good one and I’m pretty sure it’s much easier for you to get the bass you really want from your car’s audio system.There’s clearly a lot to take into consideration ranging from the power handling of your amp/head unit to the size o the shallow mount sub that will work for you best. Either way, the trick lies in carefully weighing out your options and getting one that will work perfectly well for you.