Socket organizers are great implements to devote to the common everyday applications. Nonetheless, they may never be really easy to come by owing to their relative scarcity as well as the higher costs they generally inflict. There is hope nonetheless. They may be easily replicated in the comfort of the home.so, DIY socket organizer is our today’s experiment.
To do this, you no doubt have to acquire and make use of the best practices and strategies of how to make socket organizer at home.
We have voluntarily decided to step in and provide the stated guidance. Our step-by-step guide here below endeavors to do just that for you. Take your time to read through to find the necessary inspiration.
How To Make Socket Organizer At Home |DIY Socket Organizer
First and foremost, you have to gather the necessary essentials and implements. Below are some of the tools-of-trade that will come in handy:
- Plywood 18×6
- 3/8th Inch Dowel – 4-foot long piece
- 1/4th Inch Dowel – 4-foot long piece
- Drill Press
- Wood Glue
- Hanging Kit Burning Kit
Step I: Prepare the work area
As always, you have to prepare the work area properly for the task of constructing the socket organizer. Preparation here entails making the area safe and secure enough for you to work. It also entails putting in place the necessary safety mechanisms to forestall the emergence of accidents.
Some of the things you want to do are to cordon the work area, ventilate it, put in place clear and legible lighting, and then put on the necessary protective gear. In particular, you have to shield your eyes and nose from the sawdust. Put on the goggles and the face mask respectively.
Step II: Prep your mainboard
Now get to the core business of making the socket organizer. Start with prepping the mainboard. Trim it to the desired length and width. Use the sawmill to accomplish this aim and use the tool chest as the measurement guide. Finish off this exercise by sanding the edges to make the same smooth.
Step III: Space the sockets
Having prepped the mainboard, you now have to space the sockets accordingly. This requires the use of a ruler. Mark out the desired distances to achieve this end. To make the process all the more accurate, consider placing the individual sockets on the board to see to it that they truly fit there. Be sure also to leave sufficient space for the dowels that you will eventually place on the sockets as you go about this.
Step IV: Drill the Holes
Proceed now to drill the holes on the boards. A drill press is no doubt the best tool for the job. Alternatively, consider using the cutting bits if you lack one in your possession. As you do this, you have to match the dowel sizing. This requires the use of the 3/8th and 1/4th bits that exist on your drill press.
If your wood is too deep, consider leaving a shallow bottom. Drill all the way through however if yours is shallow. Also, take care of the angles and the elevations of the dowel holes. See to it that your incline or stay level depending mainly on the nature of the organizer you are after.
Step V: Trim the Dowels
Cut your dowels now that you have drilled your holes. Use the 4-foot dowel poles to do the job. They are the ones that have been noted to grant your sockets the snug fit they require to stay firm and demand no extra magnet to tighten.
For best fits, you have to cut the dowels to 1-3/4th lengths. This is long enough to fit into the board while at the same time providing sufficient support for each socket. On the whole, the exercise takes around 5-10 minutes to actualize. Conclude this stage of the exercise by sanding the top edges for the sockets to slide down smoothly.
Step VI: Slot in the Dowels
At this stage, you have to slot the dowels in the pre-drilled holes. Secure them by placing a dab of wood glue onto the extreme end of the dowel. This glue lets your dowel stay longer than the simpler tight fit. Make this fit tighter by hitting the end with a hammer.
Wipe each end of the dowel thereafter using a damp cloth. This way, you will be able to pick up any residual glue that may be left on the surface or pushed up as soon as the dowel got into the hole. The end result of this wipe is a professional appearance.
Step VII: Mark the Sizing
Your socket organizer is almost complete. Before you call it a day, you have to mark the sizing. These markings basically allow the users to easily spot the positions of points on the sockets that they will, in turn, have to slot the sockets later.
Allow the glue to dry first and foremost before embarking on this exercise. This will take roughly an hour to overnight to implement. As the glue sets, any possible loose dowels are hardened to prevent the same from sliding or wiggling as soon as the weight of the dowel is impressed on it. After drying, be sure to label the sizes appropriately.
Step VIII: Lay some final touches
Having marked the sockets completely, you now have to lay some final touches onto it. Rub the surface of the holder using sandpaper yet again. Proceed to rub it yet again with polyurethane and sand it again. Leave to dry before proceeding to store in a cool dry place.
Just to reiterate an earlier point, knowing how to construct a do-it-yourself socket is a critical thing as it has the ability to make or break a situation. You have no choice but to read through our explanations above keenly before setting out on the task.
As a bonus, we would suggest that you carry out mock construction of these sockets from time to time. That way, you will be able to deepen your expertise and avoid the common mistakes people make as they go about this business. It pays to share the information far and wide also…