How To Inflate A Pool With An Air Compressor

How To Inflate A Pool With An Air Compressor | DIY 6 Easy Steps

You bought but don’t know how to inflate a pool? Inflatable pools give us the convenience of having to enjoy swimming and other water-borne activities at the convenience of our homes. Obviously, before deploying them for use, you have to inflate them. The use of air compressors is a sure way of managing a great outcome in this.

Generally, the air compressor supplies the air you need right where and when you may need the same. That is mainly owing to the portable nature that lets you carry it out and about easily. We want to provide you with the guidance you need to inflate your pools with the air compressors conveniently.

How To Inflate A Pool With An Air Compressor

Tools Required

  • Air compressor
  • Hose
  • Mains electricity supply

Follow The Steps Below:

#1 Set the unit up in place

Needless to say, you have to set the unit up in place before commencing. This simply entails attaching all the parts and components and then double-checking them. You have to find the parts and the components that match together before starting out. This may no doubt require technical assistance especially if you are a new user.

Upon identifying the parts and the components, you need to proceed to pair them together in a harmonious manner. That entails fixing two parts that go together smoothly. You will have to refer to the manufacturer’s manual extensively to achieve much success in this.

Now remove the cap of the valve of the air filter from the pool to ready it for the subsequent task of inflation. How you prep the air compressor depends on its kind. A heavy-duty compressor will generally take longer to activate than the lighter variants.

#2 Attach the hose to the air filling valve

At this stage, you have to attach the hose to the air-filling valve. This of course is to allow the air to flow smoothly from the compressor to the air filling valve. To do this, follow these steps:

  • Reach out for the valve on the air filter
  • Remove the cap
  • Connect the hose of the air compressor to the air filling valve
  • Fit the hose properly inside in such a way as to disengage the flap that stops the air from seeping out

#3 Connect the compressor to the pool

You now need to go beyond this to connect the compressor to the pool. This is to allow the air to flow from the compressor to the inflatable materials that make the pool up. The steps below will surely help you to accomplish this end:

  • Locate the air inlet on the inflatable pool
  • Fit the air hose attachment to the port of the pool
  • Tighten the fixture so that it does not let out the air
  • Attach the hose to the pool and seal with the plastic cover

#4 Turn on the compressor and start filling

Go ahead and turn on the compressor. As you do this, the pool inflates slowly and steadily. Monitor the progress of the inflation to ensure that the pool is not over-inflated. You will observe that the pool gets bigger and bigger until it gets to your desired state and level of hardness.

After it has reached your desired level of hardness, you have to tighten the seal to prevent the air from seeping out. Do not over-inflate as that may only serve to rupture the fabric that makes the pool up and pose premature damages. Disengage the compressor as soon as you are done with the process.

#5 Replace the cap (optional)

Though optional, you are strongly advised to replace the cap of the fill valve of the pool. This shall give it the strength it requires to hold back the air from possibly escaping out in the open. This is especially important if you have to operate the pool for a longer-than-average duration of time.

#6 Turn off the compressor

You are now almost good to go. Before you go, you have to turn off the compressor. These steps shall certainly get the job done:

  • Switch off the air compressor
  • Detach the hose from the air compressor
  • Close the inlet channel promptly to prevent the air from seeping out
  • Get rid of water from the tank by opening the drain valve
  • Clean the tank (optional)
  • Unplug the air compressor from the mains electricity outlet
  • Store the air compressor safely until the same might be needed later
  • You are now good to go!

Safety Measures

Below are some of the safety measures you should adhere to when tackling this chore:

  • Refrain from over-inflating the pool. (Turn off the compressor before it is too late.)
  • Never inflate the pool when the same is filled with water. Do not top-up water while still inflating it either. Wait until the pool is fully inflated before pouring the water.
  • Eliminate all the sharp objects in and around the pool area prior to kick-starting the inflation exercise. On the same note, keep the area tidy and free of any contaminants as they may ruin your health.
  • Moderate the inflation to minimize the strains on the materials that make up the pool. You want to inflate the pool if and only if you have to as opposed to every time.
  • Bring in an expert to inspect the pool from time to time so that you may anticipate any issues that may pose further threats later on.

Conclusion

If you must inflate your pool at the convenience of your home, you must definitely do things right. That is because any mistakes you make in this thing may often have far-reaching consequences. By reading in between the lines above and adhering to the tips laid down, you will surely do a great job.

It is not enough for you to inflate your pools well. You also have to inspect it every quite often to ascertain that it is indeed in the best shape possible. That will prevent issues from getting out of hand and also grant you ample time to deter them from arising in the first place.

Similar Posts

Leave a Reply